This design is targeted for xck24 board (part number: xck24-ubva530-2lv-c)

Zynq UltraScale+ Design Summary

Device	xck24
SpeedGrade	-2lv
Part	xck24-ubva530-2lv-c
Description	Zynq UltraScale+ PS Configuration Report
Vendor	Xilinx

MIO Table View

MIO Pin	Peripheral	Signal	IO Type	Speed	Pullup	Direction	Drive Strength(mA)
MIO 0	Quad SPI Flash	sclk_out	cmos	slow	pullup	out	4
MIO 1	Quad SPI Flash	miso_mo1	cmos	slow	pullup	inout	4
MIO 2	Quad SPI Flash	mo2	cmos	slow	pullup	inout	4
MIO 3	Quad SPI Flash	mo3	cmos	slow	pullup	inout	4
MIO 4	Quad SPI Flash	mosi_mi0	cmos	slow	pullup	inout	4
MIO 5	Quad SPI Flash	n_ss_out	cmos	slow	pullup	out	4
MIO 6	SPI 1	sclk_out	cmos	slow	pullup	inout	4
MIO 7	GPIO0 MIO	gpio0[7]	cmos	slow	pullup	inout	4
MIO 8	GPIO0 MIO	gpio0[8]	cmos	slow	pullup	inout	4
MIO 9	SPI 1	n_ss_out[0]	cmos	slow	pullup	inout	4
MIO 10	SPI 1	miso	cmos	slow	pullup	inout	4
MIO 11	SPI 1	mosi	cmos	slow	pullup	inout	4
MIO 12	GPIO0 MIO	gpio0[12]	cmos	slow	pullup	inout	4
MIO 13	SD 0	sdio0_data_out[0]	cmos	slow	pullup	inout	4
MIO 14	SD 0	sdio0_data_out[1]	cmos	slow	pullup	inout	4
MIO 15	SD 0	sdio0_data_out[2]	cmos	slow	pullup	inout	4
MIO 16	SD 0	sdio0_data_out[3]	cmos	slow	pullup	inout	4
MIO 17	SD 0	sdio0_data_out[4]	cmos	slow	pullup	inout	4
MIO 18	SD 0	sdio0_data_out[5]	cmos	slow	pullup	inout	4
MIO 19	SD 0	sdio0_data_out[6]	cmos	slow	pullup	inout	4
MIO 20	SD 0	sdio0_data_out[7]	cmos	slow	pullup	inout	4
MIO 21	SD 0	sdio0_cmd_out	cmos	slow	pullup	inout	4
MIO 22	SD 0	sdio0_clk_out	cmos	slow	pullup	out	4
MIO 23	SD 0	sdio0_bus_pow	cmos	slow	pullup	out	4
MIO 24	I2C 1	scl_out	cmos	slow	pullup	inout	4
MIO 25	I2C 1	sda_out	cmos	slow	pullup	inout	4
MIO 26	GPIO1 MIO	gpio1[26]	cmos	slow	pullup	inout	4
MIO 27	DPAUX	dp_aux_data_out	cmos	slow	pullup	out	4
MIO 28	DPAUX	dp_hot_plug_detect	cmos	fast	pullup	in	12
MIO 29	DPAUX	dp_aux_data_oe	cmos	slow	pullup	out	4
MIO 30	DPAUX	dp_aux_data_in	cmos	fast	pullup	in	12
MIO 31	GPIO1 MIO	gpio1[31]	cmos	slow	pullup	inout	4
MIO 32	PMU GPO 0	gpo[0]	cmos	slow	pullup	out	4
MIO 33	PMU GPO 1	gpo[1]	cmos	slow	pullup	out	4
MIO 34	GPIO1 MIO	gpio1[34]	cmos	slow	pullup	inout	4
MIO 35	GPIO1 MIO	gpio1[35]	cmos	slow	pullup	inout	4
MIO 36	UART 1	txd	cmos	slow	pullup	out	4
MIO 37	UART 1	rxd	cmos	fast	pullup	in	12
MIO 38	GPIO1 MIO	gpio1[38]	cmos	slow	pullup	inout	4
MIO 39	GPIO1 MIO	gpio1[39]	cmos	slow	pullup	inout	4
MIO 40	GPIO1 MIO	gpio1[40]	cmos	slow	pullup	inout	4
MIO 41	GPIO1 MIO	gpio1[41]	cmos	slow	pullup	inout	4
MIO 42	GPIO1 MIO	gpio1[42]	cmos	slow	pullup	inout	4
MIO 43	GPIO1 MIO	gpio1[43]	cmos	slow	pullup	inout	4
MIO 44	GPIO1 MIO	gpio1[44]	cmos	slow	pullup	inout	4
MIO 45	GPIO1 MIO	gpio1[45]	cmos	fast	pullup	inout	12
MIO 46	GPIO1 MIO	gpio1[46]	cmos	slow	pullup	inout	4
MIO 47	GPIO1 MIO	gpio1[47]	cmos	slow	pullup	inout	4
MIO 48	GPIO1 MIO	gpio1[48]	cmos	slow	pullup	inout	4
MIO 49	GPIO1 MIO	gpio1[49]	cmos	slow	pullup	inout	4
MIO 50	GPIO1 MIO	gpio1[50]	cmos	slow	pullup	inout	4
MIO 51	GPIO1 MIO	gpio1[51]	cmos	slow	pullup	inout	4
MIO 52	GPIO2 MIO	gpio2[52]	cmos	fast	pullup	inout	12
MIO 53	GPIO2 MIO	gpio2[53]	cmos	fast	pullup	inout	12
MIO 54	GPIO2 MIO	gpio2[54]	cmos	slow	pullup	inout	4
MIO 55	GPIO2 MIO	gpio2[55]	cmos	fast	pullup	inout	12
MIO 56	GPIO2 MIO	gpio2[56]	cmos	slow	pullup	inout	4
MIO 57	GPIO2 MIO	gpio2[57]	cmos	slow	pullup	inout	4
MIO 58	GPIO2 MIO	gpio2[58]	cmos	slow	pullup	inout	4
MIO 59	GPIO2 MIO	gpio2[59]	cmos	slow	pullup	inout	4
MIO 60	GPIO2 MIO	gpio2[60]	cmos	slow	pullup	inout	4
MIO 61	GPIO2 MIO	gpio2[61]	cmos	slow	pullup	inout	4
MIO 62	GPIO2 MIO	gpio2[62]	cmos	slow	pullup	inout	4
MIO 63	GPIO2 MIO	gpio2[63]	cmos	slow	pullup	inout	4
MIO 64	GPIO2 MIO	gpio2[64]	cmos	slow	pullup	inout	4
MIO 65	GPIO2 MIO	gpio2[65]	cmos	slow	pullup	inout	4
MIO 66	GPIO2 MIO	gpio2[66]	cmos	slow	pullup	inout	4
MIO 67	GPIO2 MIO	gpio2[67]	cmos	slow	pullup	inout	4
MIO 68	GPIO2 MIO	gpio2[68]	cmos	slow	pullup	inout	4
MIO 69	GPIO2 MIO	gpio2[69]	cmos	slow	pullup	inout	4
MIO 70	GPIO2 MIO	gpio2[70]	cmos	slow	pullup	inout	4
MIO 71	GPIO2 MIO	gpio2[71]	cmos	slow	pullup	inout	4
MIO 72	GPIO2 MIO	gpio2[72]	cmos	slow	pullup	inout	4
MIO 73	GPIO2 MIO	gpio2[73]	cmos	slow	pullup	inout	4
MIO 74	GPIO2 MIO	gpio2[74]	cmos	slow	pullup	inout	4
MIO 75	GPIO2 MIO	gpio2[75]	cmos	slow	pullup	inout	4
MIO 76	GPIO2 MIO	gpio2[76]	cmos	slow	pullup	inout	4
MIO 77	GPIO2 MIO	gpio2[77]	cmos	slow	pullup	inout	4

PS Clocks information

PSS REF CLK : 33.333

Name	Source	Input Frequency (MHz)
APLL	PSS_REF_CLK	2633.307
DPLL	PSS_REF_CLK	2099.979
VPLL	PSS_REF_CLK	2999.970
RPLL	PSS_REF_CLK	2133.312
IOPLL	PSS_REF_CLK	2999.970

Peripheral	Requested Frequency (MHz)	Source	Actual Frequency (MHz)
QSPI freq (MHz)	125	IOPLL	124.998749
SDIO0 freq (MHz)	200	IOPLL	187.498123
UART1 freq (MHz)	100	IOPLL	99.999001
I2C1 freq (MHz)	100	IOPLL	99.999001
SPI1 freq (MHz)	200	IOPLL	187.498123
CPU_R5 freq (MHz)	533.333	RPLL	533.328003
IOU_SWITCH freq (MHz)	250	IOPLL	249.997498
LPD_SWITCH freq (MHz)	500	IOPLL	499.994995
LPD_LSBUS freq (MHz)	100	IOPLL	99.999001
TIMESTAMP freq (MHz)	100	IOPLL	99.999001
PCAP freq (MHz)	200	IOPLL	187.498123
DBG_LPD freq (MHz)	250	IOPLL	249.997498
ADMA freq (MHz)	500	IOPLL	499.994995
PL0 freq (MHz)	100	IOPLL	99.999001
PL1 freq (MHz)	100	IOPLL	99.999001
AMS freq (MHz)	50	IOPLL	49.999500
ACPU freq (MHz)	1333	APLL	1333.000000
DBG FPD freq (MHz)	250	IOPLL	249.997498
DP VIDEO freq (MHz)	300	VPLL	299.997009
DP AUDIO freq (MHz)	25	RPLL	24.242182
DP STC freq (MHz)	27	RPLL	26.666401
DDR_CTRL freq MHz)	266.500	DPLL	262.497375
GPU freq (MHz)	600	DPLL	524.994751
GDMA freq (MHz)	600	DPLL	524.994751
DPDMA freq (MHz)	600	APLL	444.333344
TOPSW_MAIN freq (MHz)	533.33	DPLL	524.994751
TOPSW_LSBUS freq (MHz)	100	IOPLL	99.999001
DBG TSTMP freq (MHz)	250	IOPLL	249.997498

DDR Memory information

Parameter name	Value	Description
ENABLE	1	Enable the PS DDR Controller
DDR Interface freq (MHz)	533	--
MEMORY TYPE	LPDDR 4	Type of memory interface
DM DBI	Components
BUS WIDTH	32 Bit	Data width of DDR interface, not including ECC data width
ECC	Disabled	Enables error correction code support
SPEED BIN	LPDDR4_1066	Speed Bin
CL	NA	Column Access Strobe (CAS) latency in memory clock cycles. It refers to the amount of time it takes for data to appear on the pins of the memory module
CWL	NA	CAS write latency setting in memory clock cycles
DDR AL	0	Additive Latency (ns). Increases the efficiency of the command and data bus for sustainable bandwidths
T RCD	10	tRCD. Row address to column address delay time. It is the time required between the memory controller asserting a row address strobe (RAS), and then asserting the column address strobe (CAS)
T RP	12	Precharge Time is the number of clock cycles needed to terminate access to an open row of memory and open access to the next row
T RC	63	Row cycle time (ns)
T RAS MIN	42	Minimum number of memory clock cycles required between an Active and Precharge command
T FAW	40.0	Determines the number of activates that can be performed within a certain window of time
DRAM WIDTH	32 Bits	Width of individual DRAM components
DEVICE CAPACITY	16384 MBits	Storage capacity of individual DRAM components
BG ADDR COUNT	NA	Number of bank group address pins
RANK ADDR COUNT	0	Dual-rank or dual-DIMM configuration of DRAM. Addressed using two chip-select bits (CS_N)
BANK ADDR COUNT	3	Number of bank address pins
ROW ADDR COUNT	16	Number of row address pins
COL ADDR COUNT	10	Number of column address bits
C_DDR_RAM_HIGHADDR	0x7FFFFFFF	--

GT lanes information

Protocol

GT lane#

Ref Clk Sel

Ref freq (MHz)